Description
- 【360° all-round exposure】The post-curing station adopts 2 L-shape light bars (each built-in 14 UV LED lights), and added 4 UV LED beads beneath the turntable. Work with 360°auto-rotating turntable and a handheld UV lamp that cures the nooks and crannies and interior of 3D prints, so that the entire model is cured thoroughly without dead ends.
- 【Dual function of washing and curing】 ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient.
- 【Large washing volume】With an 7000ml large capacity sealed water tank, you can directly wash large models printed by ELEGOO Saturn and Mars 3, or clean parts in batches, which offers substantial time savings and improves your productivity.
- 【Easy and intuitive operation】With a single knob, just press and hold to turn on the machine, then rotate the knob to set an appropriate time for washing or curing, and your models will be ready in a short time. The UV cover can block 99.9% of ultraviolet rays and protect your eyesight during post-curing.
- 【Wide compatibility】Directly compatible with ELEGOO Saturn series or Mars series 3D printers and the most similar build volume LCD/DLP/SLA 3D resin printers on the market, making your 3D resin print post-processing simple, professional, and efficient. Note: Compared with the ELEGOO Mercury X Bundle Wash and Cure Station, the ELEGOO Mercury XS Bundle Wash and Cure Station has an additional handheld light and glasses.
Operation instructions:
- After the model is printed, please clean and blow-dry the model before putting it into the curing machine.
- If the model become yellow after curing, please adjust the curing time. Over curing will lead to a yellowing model.
- The recommended ambient temperature is 0-40 degrees, and the ambient humidity is 20%-50%.
- To avoid overheating of the curing cabinet, please do not use it for more than 40 minutes at a time.
- Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
- Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
Technical Specifications
ELEGOO Mercury XS WASH Machine
- Control Method: Knob + Button
- Rated Power: 12W
- Input Voltage: 110V/240V 50/60Hz
- Time Setting: 0-30mins
- Machine Size: 255mm*155mm*385.5mm
- Maximum Wash Volume:
- (with platform)180mm*121mm*153mm
- (without platform)201mm*124mm*255mm
- Machine Net Weight: 2.27kg
ELEGOO Mercury XS CURE Machine
- Control Method: Knob + Button
- Rated Power: 36W
- Input Voltage: 110V/240V 50/60Hz
- Time Setting: 0-30mins
- Machine Size: 246mm*230mm*363.5mm
- Maximum Curing Size: 200mm*260mm
- Machine Net Weight: 2.4kg
