JamgHe Standard plus resin 10k is a general 3d resin with rigid property, high hardness 88D, a great choice for hobbies to make miniature or garage kits etc. so is the best option for dental labs to make orthodontic model and also for miniatures.
Just take JAMG HE 10K Standard Plus resin, so you don’t have to keep so many resins for the same type, and the most important thing is low odor, high accurate and the best price among all the 8k resins
JamgHe Standard plus resin 10k works well on all resin printer with 385-405nm (2k,4k,6k,8k,12k LCD) brands like Elegoo, Anycubic and Phrozen ect.
This standard resin has multiple colour option with highest quality, it is the cheapest resin compare with other 8k resin, and fast printing, normally you don’t have to change any parameter on the 3d printer that you have on hand. The best resin for 3d printing with low-cost, great detail and smooth surface, you are able to print with full platform with large resin 3d successfully for miniature or dental model. JamgHe 3d resin is Eco-friendly without any solvent inside, so that the smell is acceptable and safer to use.
- High Precision and Low Shrinkage: Jamg he 10k standard resin can be printed more specific detail it is because the special formula
- Low Odor-JAMG HE standard Resin has lower irritation odor than other resin and it will let you more enjoy the whole printing process
- Multiple colors for you to choose,and you can combine different colors to creat one new color,well Compatible with All kinds of 3D printer 385-405nm in the market and wide use in varity area like home, office, school, etc. eco-friendly 3d printing resin and used in the production of toys, carton figures, education, dental models, etc.
- better curing and excellent stability: Jamg he standard resin can be cured in very short time and very stable in some extremely environment
- Low Viscosity-low Viscosity is one main character of excellent resin,it will help you to print less failure, JAMG HE 10K standard Resin is low Viscosity resin and will assit you to print more sucessfully with less worried.
Product Advantages :
- Short curing time
- Fine surface,
- Finest detail features.
- After curing, the printed piece has high hardness and toughness
Product Technical Parameters before Curing:
- Viscosity: 300~500mPa•s (NDJ-8S rotary rheometer（25℃))
- Density: 1.05~1.25g/cm3 (densitometer(25℃))
Molding Test Requirements and Technical Parameters after Molding
Molding Test Environment and Standard:
- Temperature: 23±2℃
- Relative humidity: 50%RH±5%RH
- The standard of the test piece: ASTM
- Post curing condition: The test piece was placed in water under 405nm ultraviolet radiation of 200mw/cm² for one minute.
Technical Parameters after Molding:
- Maximum force(KGF): 168.7±10%
- Tensile strength(MPa): 45.62±10%
- Deformation of maximum point of force(mm): 5.75±10%
- Elongation at yield point(%): 6.34±10%
- Elongation at break(%): 11.5±10%
- Maximum bending strength(MPa): 58.3±10%
- Flexural modulus(MPa): 1123.2±10%
- Hardness(Shore D)：80-85
- Impact strength(j/m): 76±10%
- Tensile modulus：608.5±10%
Warning:
- This product is disposable and cannot be reused.
- This product should not be in contact with eyes, skin or clothing, and should not be tasted or eaten. Use only in good ventilation, please pay attention to air circulation, and take protective measures. Clean thoroughly after operation.
- This product is liquid and has a slight odor. Please wear a mask when using it to avoid inhalation of aerosol and infection.
- This product should be stored in an airtight container, sealed immediately after use, and placed in a dry and well-ventilated place without exposure to sunlight.
- In case of accidental inhalation of this product, leave the scene in time, quickly transfer to a place with fresh air, in case of adverse reactions, go to the hospital for treatment in time.
- If swallowed this product accidentally, do not induce vomiting, keep a state of rest, timely sent to the hospital treatment.
- In case of contact with skin, wash skin thoroughly with soapy water or seek medical advice.
- In case of contact with eyes, open eyelids immediately, rinse with soapy water for about 20 minutes and seek medical advice immediately.
- Waste water/waste shall be disposed of in accordance with local environmental regulations.
Storage:
- Please seal the product and store it in a dry, well-ventilated room with no corrosive gas, keep away from heat source, keep away from moisture and avoid sun exposure.
- Shelf life 1 year. (The product is best stored at 25~30℃)
