PLA (polylactic acid) is the most common and perhaps the most accessible filament type. Contrary to the other filament, it’s not oil-based but made instead from corn starch or sugar cane as well as with other components. Although it’s still plastic, this composition makes it slightly less damaging to the environment than the any other filaments. PLA+ has many advantages like being affordable, printable at lower temperatures, and not requiring an enclosure. 3D Master PLA+ filaments are compatible with the entire FDM machine like Creality, Flashforge, Prusa, Anycubic and Qidi.
- Name：PLA+ Filament 1.75MM
- Color : SILK COPPER
- Brand：3D MASTER
- Diameter：1.75mm
- Filament weight：1KG NETT (G.W: 1.3KG)
- Print temperature：195 – 210°C
- Platform temperature: 0-60°C
TYPICAL MATERIAL PROPERTIES:
|
Value | Method | |
| Melting Temperature [°C] | 170 – 180°C | ISO 11357 | |
| Glass Transition Temperature [°C] | 60 – 65°C | ISO 11357 | |
| Melt Flow Index | 9g/10min | ISO 1133
( 210°C/2.16kg ) |
|
| Moisture | <455ppm | ASTMD637-16 | |
| Specific Gravity [g/cm3] | 1.24g/cm3 | ISO 1183 | |
| Tensile Strenght | 55 Mps | ISO 527-1 | |
| Tensile Modules | 3725 Mpa | ISO 527-1 | |
| Elongation at Break | < 4.25% | ISO 527-1 | |
| Charpy Notched Impact | 5.5 – 6.5 kj/m2 | ISO 75 |
